Ardunio Boards
Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328.
It has more or less the same functionality of the Arduino Due but in a different package.
It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
It is one of the smallest and yet most exciting breadboard-friendly boards available on the market today.
It's become exceptionally popular with beginner programmers thanks to its excellent functionality and the sheer variation of potential applications.
Based on the ATmega328P, this tool is fantastic for those who wish to improve their programming skills and create some interesting and unusual projects.
While the item does not come with a DC power pack, it benefits from a mini-USB cable for power, and that means you can use it with any PC or laptop device.
Features
- Automatic reset during program download
- Power OK blue LED
- Green (TX), red (RX), and orange (L) LED
- Auto-sensing/switching power input
- Small mini-B USB for programming and serial monitor
- ICSP header for direct program download
- Standard 0.1” spacing DIP (breadboard friendly)
- Manual reset switch
SPECIFICATIONS
Microcontroller | Atmel ATmega328P |
Operating Voltage (logic level) | 5 V |
Input Voltage (recommended) | 7-12 V |
Input Voltage (limits) | 6-20 V |
Digital I/O Pins | 14 (of which 6 provide PWM output) |
Analog Input Pins | 8 |
DC Current per I/O Pin | 40 mA |
Flash Memory | 32 KB |
SRAM | 2 KB |
EEPROM | 1 KB |
Clock Speed | 16 MHz |
* Product Images are shown for illustrative purposes only and may differ from actual product.
This Transparent Acrylic Box For Arduino UNO R3 Development Board comes with screw copper pillar and it is Simply Clicks Together Enclosure.
The main use is to protect your little computer against damages, dust and scratches Clear Top and Bottom.
This case provides easy access to all ports. It requires no tools for easy assembly and disassembly.
Specifications:-
Microcontroller : ATmega SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega 328p) of which 0.5 KB used by bootloader.
* Product Images are shown for illustrative purposes only and may differ from actual product.
It is 8 Channel Isolated 5V 10A Relay Module. it can be used various microcontrollers like Arduino, Raspberry Pi, AVR, PIC, ARM .
It is also able to control various appliances and other types of equipment with large current upto 10 amp.
Relay output maximum contact is AC250V 10A and DC5V 10A. One can connect a microcontroller with standard interface directly to it.
Each relay can individually switch on/off by an opto-isolated digital input, which that can connect directly to a microcontroller output pin. It only requires a voltage of approx 1.0V to switch the inputs on but can handle input voltages up to 5V. This makes it ideal for 1.0V to 5V devices.
Specifications and Features:-
- Channel: 8 channel
- Relay Operating Voltage: 3.3V to 5V
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Relay Control indicator lamp
- Input signal, signal, common Terminal and start conducting;
- Useful for appliance control;
- DC or AC signal, control, you can control the 220V AC load;
- There is a normally open and one normally close contact;
- The module is compliant with international safety standards, control and load areas isolation trenches.
* Product Images are shown for illustrative purposes only and may differ from actual product.
4 channel 5v relay module
This is 4 Channel , 5V Relay Board Module For a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can be controlled by them.
Specification and Features :-
- 4 channel relay board
- Operating Voltage : 3.3V - 5V DC
- Max Input Current : 20mA
- Relay output Contact Current Capacity at AC250V: 10A
- Relay output Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can be used to control various appliances & other Equipment With Large current upto 10 amp.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Images are shown for illustrative purposes only and may differ from actual product .
** GSTIN Invoice available for Business buyer, Put your GSTIN number in Remarks while placing order
Arduino Starter Kit with Sensors, 5V adapter and Arduino enclosure : -
- This Arduino Uno based Starter Kit includes
- One Arduino smd board with cable
- Case for Arduino
- Power adapter 5v, 1 Amp for arduino and realys and sensors
- one 5v, 2ch relay
- one 5v, 4ch low tigeer relay
- One DHT 11 sensor
- One PIR sensor
- One Ultrasonic sensor
- One Door Sensor
- This Starter kit is a best childrens, engineering students to learn about Robotics, Arduino programming by making several trendy DIY projects like professionals.
Arduino UNO R3 SMD board with Cable : ATmega 328P microcontroller board
Arduino UNO R3 SMD is the open source Embedded Development board launched by Arduino based on Atmega SMD Package Microcontroller. Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega is becoming more and more difficult to get. The board is identical to the PTH version of the Uno, but you won't be able to remove the ATmega without some hot-air.
Product Features:
Microcontroller : ATmega SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
DC Current for 3.3V Pin : 50 mA.
Flash Memory : 32 KB (ATmega 328p) of which 0.5 KB used by bootloader.
** bulk buyer more than 10 Pcs, can contact us @ 9829082231
** GSTIN Invoice available for Business buyer, Put your GSTIN number in Remarks while placing order
- 1